Inventory Listing

New Sales, Used Sales & Long Term Rentals

Doosan DL220-5 Wheel Loader

Doosan DL220-5 Wheel Loader
Doosan DL220-5 Wheel Loader

Load and carry applications will meet their match with the Doosn® DL220-5 wheel loader. It’s ideally sized to fit many state, county and municipal government requirements.

Performance features include a powershift transmission with optimized hydraulic pumps, multiple power modes, Z-bar lift arm, return to dig, and limited slip differentials on both front and rear axles.

With the high lift option, you’ll gain additional lift height and reach. Easily load materials like cement, coal, grain, fertilizer, or waste into high-sided trucks, hoppers or mixers. High lift is ideal for processing plants, scrap and recycling facilities, and agricultural operations.

To help save valuable diesel fuel, auto idle and auto-shutdown and come standard. Auto idle automatically reduces the engine RPM to standby idle when the steering wheel or joystick control lever, isn’t utilized for a few seconds. When enabled, auto shutdown will stop the engine when the preset idle time is met. Operators can configure the idle time from 3 to 60 minutes.

  • There are no features available

Doosan DL220-5

Rated Flywheel Power (Gross)
160 hp @ 2,100 rpm
Rated Horse Power (Net)
160 hp @ 2,100 rpm
Max. Torque (Net)
542 lbf·ft @ 1,400 rpm
Main Pump: Displacement
4.52 in³/rev
Boom Speed - Up (Loaded)
6 s (±0.5 s)
Boom Speed - Down
3.5 s (±0.4 s)
Bucket Speed - Dump
1.2 s (±0.3 s)
Main Pump: Max. Flow Rate (each)
40.95 gal/min
Main Pump: Main Relief Pressure
3,626 psi
Total Cycle Time
10.7 s (±0.3 s)
Travel performance: Gradeability
30° @ 58 %
Traveling performance: Max. Tractive Effort
24,692 lb
Operating Weight
27,381 lb
Bucket Capacity
3.01 yd³
Bucket Width
8' 4"
Hinge Pin Height
12' 7"
Dump reach at 45° (fully raised)
3' 5"
Dump height at 45° (fully raised)
9' 3"
Overall Height
10' 9"
Overall Length
24' 5"
Wheel Base
9' 10"
Ground Clearance
1' 5"
External Turning Radius at Bucket Edge
19' 6"
Static Tipping Load (Straight)
21,231 lb
Static Tipping Load (Full Turn)
18,750 lb
Breakout Force
22,706 lbf
Rear Axle Oscillation
22°
Travel Speed Forward - 1st gear
4.35 mph
Fuel Tank
62.08 gal
Cooling System
8.29 gal
Hydraulic System
39.63 gal
Hydraulic Tank
31.7 gal

Financing Calculator

Cost of Vehicle ($):
Down Payment ($):
Annual Interest Rate (%):
Term of Loan in Years:
Frequency of Payments:
Calculate My Payment
NUMBER OF PAYMENTS: 60
PAYMENT AMOUNT: $ 89.11
Back to top